|
Mitsubishi L200
Notes regarding fitting Parking Sensors to Pick
up Trucks:
(1) Only use sensors that are recommended
for use in metal bumpers.
(2) When the hole is drilled in the bumper, the
bare metal must be treated with a suitable metal paint to prevent rust forming
around the sensor.
(3) A kit with Long sensor leads is recommended
for this vehicle so that the CPU can be mounted in the cab. The CPU should
never be positioned behind the rear lights.
Mitsubishi L200 Elegance Pickup
(2006 Model) professionally fitted by Alan Barnard Tel: 07770 592915 Covering
Hampshire, Wiltshire & Dorset.
A standard reverse parking sensor kit cannot be fitted to single or double
cab pickup trucks because the sensor cable lengths are normally too short, the CPU (Control Box) needs to be mounted somewhere clean and dry, in the cab. The standard "sensor to CPU" cable length is 3 metres,
this kit is supplied with 7 metre cable lengths at no
extra charge.
Mitsubishi L200 Elegance Pickup
(2006 Model) professionally fitted by
Greg Southgate Tel:07525 923184 Covering Suffolk.
Customer comments:
I have just had some of your parking sensors
fitted by Greg Southgate, I can highly recommend your sensors and his fitting
service, he was clean tidy and did exactly what he said he would do, for the
amount quoted. Well done to all concerned. Robert Bowles
Mitsubishi L200 Elegance Pickup
(2006 Model) professionally fitted by Alan Barnard Tel: 07770 592915 Covering
Hampshire, Wiltshire & Dorset.
Mitsubishi L200 Elegance Pickup
(2006 Model) fitted by Alan Barnard Tel: 07770 592915 Covering
Hampshire, Wiltshire & Dorset.
Fitters comments: "the
bracket was added too as part of the fit to mount the camera, ran the power
supply to the camera up into the n/s/r lamp, all other connections were made in
n/s/f passenger kick panel, looked quite smart, the customer requested to be
able to see the towball & that's what we achieved plus a good view to the rear."
Mitsubishi L200 Pickup
(2003 Model)
A standard reverse parking sensor kit cannot be fitted to single or double
cab pickup trucks because the sensor cable lengths are normally too short, the CPU (Control Box) needs to be mounted somewhere clean and dry, in the cab. The standard "sensor to CPU" cable length is 3 metres,
this kit is supplied with 7 metre cable lengths at no
extra charge.
Mitsubishi L200 Pick up truck
(2005 Model) professionally
fitted by Alan Barnard Tel: 07770 592915 Covering Hampshire, Wiltshire & Dorset.
Mitsubishi L200 Elegance Pickup
(2006 Model) professionally fitted by Smart Tech Kent Ltd Parking
Sensor Mobile Fitting Service Tel: 01795 558118 or 07799 431345 Covering
Kent, East Sussex & Surrey.
Mitsubishi L200 Warrior Pickup
Professionally fitted by Practical Vehicle Accessories, Mobile Fitter covering
East & West Sussex, Kent, Hampshire & Surrey. Tel:
07515 405 437
Mitsubishi L200 Warrior Pickup
Professionally fitted by Performance Chipping, Mobile Fitter covering
Spalding, Lincolnshire covering
Lincolnshire & Norfolk. Tel:
01406 424 231 or 07919 993 732.
| 
![Visa Delta [1258 bytes]](http://perfect-parking.co.uk/photos/VISD.gif){kind=small}
